3-piece turbo diamond drill bit

3-piece turbo diamond drill bit

SKU	Drilling diameter MM	Drilling diameter Inch	UNC	BSP	Drilling length MM	Overall length	Z
0504222	22	” 55/64		1/2“	410	400	3
0504225	25	63/64”		1/2“	410	400	3
0504229	29	1 9/64”		1/2“	410	400	3
0504232	32	1 17/64”		1/2“	410	400	4
0504238	38	1 1/2”		1/2“	410	400	4
0504245	45	1 49/64”		1/2“	410	400	5
0504252	52	2 3/64”		1/2“	410	400	5
0504257	57	2 1/4”		1/2“	410	400	5
0504263	63	2 31/64”		1/2“	410	400	6
5042607	67	2 63/64″		1/2″	410	400	6
0504270	70	2 3/4”		1/2“	410	400	6
0504272	72	2 53/64”		1/2“	410	400	6
0504276	76	2 63/64”		1/2“	410	400	6
0504283	83	3 17/64”		1/2“	410	400	6
0504302	102	4“		1/2“	460	400	6
0504332	102	4“	1-1/4“		460	400	7
0504308	108	4 1/4″	1-1/4“		460	400	6
0504314	114	4 31/64”	1-1/4“		460	400	6
0504327	127	5“	1-1/4“		460	400	7
0504352	152	5 63/64”	1-1/4“		460	400	8
0504362	162	6 3/8”	1-1/4“		460	400	8
0504378	178	7 1/64”	1-1/4“		460	400	8
0504403	203	7 63/64”	1-1/4“		460	400	8
0504454	254	10”	1-1/4“		460	400	8
0504530	300	12″	1-1/4“		460	400	8

3-piece turbo diamond drill bit Diamond glasses will be repaired under warranty only under the following conditions: Three-piece BSP cup drills: – One tooth falling out and the segment height is over 50% – crown replacement without charge. In all other cases, no liability will apply. Speed drills – cold (dry and fast drilling): – Broken tooth and the cup segment remains at the initial height – replacement. – Broken tooth and the glass segment has dropped to half its initial height – replacement at a cost of 50% of the product value. – Broken tooth and the cup segment has dropped below 50% of its initial height – no warranty. In the following cases, no liability will apply: – Breaking a piece of the tooth – Drilling iron directly