Turbo Diamond Core Drill Base

Turbo Diamond Core Drill Base

UNC	BSP	Drilling diameter Inch	Drilling diameter MM	SKU
	1/2“	63/64”	25	0504625
	1/2“	“1 9/64”	29	0504629
	1/2“	“1 17/64”	32	0504632
	1/2“	“1 1/2”	38	0504638
	1/2“	“1 3/64”	52	0504652
	1/2“	“2 1/4”	57	0504657
	1/2“	“2 31/64”	63	0504663
	1/2“	“2 3/4”	70	0504670
	1/2“	“2 63/64”	76	0504676
	1/2“	“3 17/64”	83	0504683
	1/2“	“4 1/64”	102	0504602
	1/2“	“4 1/4”	108	0504608
	1/2“	“4 31/64”	114	0504614
	1/2“	“5”	127	0504627
	1/2“	“5 63/64”	152	0504052
	1/2“	“7 1/64”	178	0504678
	1/2“	“7 63/64”	203	0504603
	1/2“	“10”	254	0504654
	1/2“	“11 13/16”	300	0504630
1-1/4”		“63/64”	25	0504925
1-1/4”		“1 9/64”	29	0504929
1-1/4”		“1 17/64”	32	0504932
1-1/4”		“1 1/2”	38	0504938
1-1/4”		“1 3/64”	52	0504952
1-1/4”		“2 1/4 – 3/64”	57	0504957
1-1/4”		2 31/64 – 3/64”	63	0504963
1-1/4”		2 3/4 – 3/64”	70	0504970
1-1/4”		2 63/64 – 3/64”	76	0504976
1-1/4”		3 17/64 – 3/64”	83	0504983
1-1/4”		4 1/64”	102	0504902
1-1/4”		4 1/4”	108	0504908
1-1/4”		4 31/64”	114	0504914
1-1/4”		5”	127	0504927
1-1/4”		5 63/64”	152	0504529
1-1/4”		7 1/64 – 3/64”	178	0504978
1-1/4”		7 63/64”	203	0504903
1-1/4”		10”	254	0504954
1-1/4”		11 13/16”	300	0504930

Turbo Diamond Core Drill Base Diamond glasses will be repaired under warranty only under the following conditions: Three-piece BSP cup drills: – One tooth falling out and the segment height is over 50% – crown replacement without charge. In all other cases, no liability will apply. Speed drills – cold (dry and fast drilling): – Broken tooth and the cup segment remains at the initial height – replacement. – Broken tooth and the glass segment has dropped to half its initial height – replacement at a cost of 50% of the product value. – Broken tooth and the cup segment has dropped below 50% of its initial height – no warranty. In the following cases, no liability will apply: – Breaking a piece of the tooth – Drilling iron directly